Without A Net

Microsoft .NET Framework 4.0 SP1

Today we have a guest post from my colleague Albert Rius from the AutoCAD Support team in Neuchâtel in Switzerland:

When installing DWG Trueview 2013, you may get prompted to install Microsoft .NET Framework 4.0 SP1 or higher.

Some customers have reported difficulties finding the right update on the Microsoft webpage.
 
Here is the correct link:
http://www.microsoft.com/en-us/download/details.aspx?id=3556

Many thanks to Albert for this tip!

Updated readme files for AutoCAD Service Pack 2

On Monday, Autodesk released the new service pack for AutoCAD 2012 and AutoCAD LT 2012. Many of you have since requested more information about what issues were actually addressed by the service pack as these details were not included in the SP2 readme file. You have been heard and the readme files have been updated to include more information about what issues are fixed by the service pack.

Re-download the updated readme files at the following links:

AutoCAD 2012 Service Pack 2
AutoCAD LT 2012 Service Pack 2

AutoCAD 2012 Service Pack 2

A new service pack for AutoCAD 2012 and AutoCAD LT 2012 is now available at the following links:

AutoCAD 2012 Service Pack 2
AutoCAD LT 2012 Service Pack 2

Consult the readme file for installation instructions and be sure to download and install the correct update for your operating system (32-bit or 64-bit).

Performance issues in AutoCAD when Autodesk Showcase 2013 is running at the same time

Some users have experienced performance degradation in AutoCAD and other Autodesk products when running them side by side with Autodesk Showcase 2013.

This issue has been resolved in Service Pack 1 for Autodesk Showcase 2013 which can be downloaded from here:

Autodesk Showcase 2013 Service Pack 1

VBA error "Object library invalid..." after installing updates from Microsoft

There is a new technical solution available that addresses a problem where VBA applications fail to run in AutoCAD after a security update from Microsoft was installed on the machine.

Error messages you might see can include:

“Object Library invalid or contains references to object definitions that could not be found”, "Cannot insert object."  or "Element not found."

Error "Object Library invalid" when running VBA applications

 

AutoCAD 2012 for Mac - Service Pack 2

Service Pack 2 for AutoCAD® 2012 for Mac® is now available for download at the following link:

AutoCAD 2012 for Mac Service Pack 2

This update resolves compatibility issues that have been reported while using the software on the latest versions of Mac OS X Snow Leopard (10.6.8) and Mac OS X Lion. It also resolves problems reported by the Customer Error Reporting (CER) utility and other general problems identified after AutoCAD 2012 Service Pack 1 was made available.

General changes and improvements have been made to the following features:

Array

• Associative arrays now correctly round-trip between the Windows and Mac OS releases.
• The program is no longer unstable when attaching an xref to an associative array.

Attributes

• The Attribute visor now displays correctly after being launched two or more times.

Blocks

• The program is no longer unstable when inserting blocks with multiple attributes.

Customization

• The program is no longer unstable after using the Customize dialog box.

Dimensions

• The program is no longer unstable when modifying a dimension that has a cyclic dependency.

Document Window

• The program is no longer unstable when switching between open drawings.

Dynamic Input/Input

• The program is no longer unstable when using dynamic input.
• The program is no longer unstable after enter a value at the Command prompt.

External References

• The program is no longer unstable after clicking a missing xref in the Reference Manager.

Hatch

• The program is no longer unstable after creating a hatch object with the Hatch and Gradient dialog box.

Install

• Installer now displays the correct message when the latest service pack is already installed.

Layers

• The program is no longer unstable after renaming a layer.
• The program is no longer unstable after setting a layer current.
• The program is no longer unstable when updating layer information while switching drawings.
• The program is no longer unstable when sorting layers in the Layers palette.

Layouts

• The program is no longer unstable when switching between model and paper space from the status bar.
• The program is no longer unstable after creating a new layout.

Multileader

• The Multileader visor no longer remains displayed after being shown multiple times.

Open/Save

• The program is no longer unstable when opening a drawing file.
• The program is no longer unstable after opening an invalid file.
• Double-clicking a drawing file in Finder now correctly opens the program and drawing file.

Options

• When support file search paths are missing, the dialog box to select a path now displays correctly.

Other

• Several general situations that caused the program to be unstable have been addressed.
• The program is no longer unstable when spell checking annotation in a drawing.

Plot

• The program is no longer unstable after clearing the DPI value in the 3D Viewports section of the Page Setup dialog box.
• The program is no longer unstable after clearing the custom scale values in the Scale section of the Plot dialog box.
• The program is no longer unstable when using a comma as a decimal separator for numbers.
• Plots are now correctly centered when both Fit to Page and Center on Page are checked.
• When resaving a named plot style (STB) file, the file no longer becomes corrupt.
• Object's plot style value can now be changed with the Properties Inspector when using named plot styles.
• Plot styles now work correctly with AutoCAD WS.

Spline

• The program is no longer unstable after selecting a spline object that was the result of joining more than one spline together.

Startup

• On Mac OS X Lion, the program now launches correctly after a crash.
• The program now checks for the required folder and file level permissions. If the permissions are incorrect, you can open a Knowledge Base article to help correct the problem.

Text Styles

• Quickly closing the Text Style dialog box no longer causes the program to become unstable.
• Fixed issues related to text fonts.

Undo/Redo

• Lineweight is no longer automatically turned off when doing an undo with zoom.

Zoom/Pan/Orbit

• The program is no longer unstable when zooming, panning, or orbiting.

As always, check out the accompanying Readme PDF for more details and installation instructions.